Ther­ma­Cote® is a high per­for­mance Weather Bar­rier that incor­po­rates ceramic tech­nol­ogy to pro­duce a fluid applied material.

The rec­om­mended appli­ca­tion method is to spray apply Ther­ma­Cote® to achieve the most cohe­sive and even finish.

Ther­ma­Cote® acts to improve the energy effi­ciency and safety in any struc­ture, res­i­den­tial or commercial.

Yes. Ther­ma­Cote® can act as your primer coat and will accept any top coat breathable paint colour you choose.

Yes, Ther­ma­Cote® is safe for indoor use and it is third-party cer­ti­fied ‘Green’ in the USA to stringent California’s Indoor Air Qual­ity Stan­dards in Class­rooms and Offices (DHS 01350). The VOC level of Ther­ma­Cote® is ultra low at 5.3 G/L, which is much friend­lier to your indoor envi­ron­ment than the major­ity of paint/coating prod­ucts on the mar­ket today.

Ther­ma­Cote® is a great primer as it has built-in cor­ro­sion inhibitors and will pro­long the life of your structure.

Ther­ma­Cote® is avail­able in the UK only through ThermaCoteUK and via our approved applicator network.  Con­tact us at  [email protected] and we will assist. 

Inte­rior appli­ca­tions will last the life of the struc­ture with no re-application nec­es­sary. Exte­rior appli­ca­tions will typ­i­cally require a re-application around 10–15 years depen­dent on cli­mate con­di­tions and proper sub­strate care (roof wash­ing 1x a year).

There are so many possibilities. Res­i­den­tial struc­tures, con­crete slabs, roofs (tile and metal), attics, conservatories, industrial, shipping containers . . .  the list goes on. 

Steel, wood, con­crete, masonry block and brick, asphalt shin­gles, plas­tic, glass, can­vas, hardy plank, woodcrete, plasterboard, magnesium oxide board etc. Ther­ma­Cote® will basically apply to almost any clean and dry surface.

Coverage rate is 1.3m2 / L (@0.5mm)

Ther­ma­Cote® once applied to a struc­ture is not recy­clable but it will last the life of the struc­ture when installed on the interior.

No, Ther­ma­Cote® is made with no haz­ardous ingre­di­ents and it is not harm­ful to the envi­ron­ment dur­ing man­u­fac­ture or application.

Yes, this is an excel­lent prod­uct for both inte­rior and exte­rior appli­ca­tions, offer­ing you numer­ous appli­ca­tion options.

Cer­ti­fi­ca­tion is a multi-step process. We will need you to hold a city and guilds spraying qualification (these are available and can be CITB funded). A second stage is a course with us at ThermaCoteUK (which is free) where we take you through a range of requirements, explain the sales and leads process as well as how the guarantee works and all the documentation that is required. There will be two strains of this second course as the sales and lead process will not be needed by everyone. Pease note, each individual will need to hold the city and guilds qualification not just one person from a company as we need to maintain the reputation and credibility of the product and those applying it. We want happy customers! We can put you in touch with a firm who can do the spray training and we will be running the second stage courses at least twice per month online and once per month at the NSBRC site at Swindon. Please con­tact us at [email protected]to learn more about the approved applicator process.

It is rec­om­mended that you clean all exte­rior appli­ca­tions as needed and inte­rior appli­ca­tions can be cleaned as needed with a wet sponge.

The finished dried product look is like a flat matt paint. It can easily be the top coat if desired. 

We offer a warranty of 10 years externally and lifetime internally. This is only if applied by an approved contractor in line with guidelines. Guarantees are signed off by ThermaCote® Europe.

Yes, ThermaCote® contains in its formulation rust inhibitors that can stop the degradation of the support.

However, it will be necessary to brush and clean the metal beforehand in order to get rid of impurities as much as possible. We would recommend and can apply a suitable primer of a ‘stop-rust’ product.